Update dependency ocserv to v1.6.0 #14

Merged
renovate_bot merged 1 commit from renovate/ocserv-1.x into master 2026-10-25 18:52:22 +00:00
renovate_bot commented 2026-10-16 23:01:08 +00:00 (Migrated from jonasled.dev)

This MR contains the following updates:

Package Update Change
ocserv minor 1.5.0 → 1.6.0

Release Notes

openconnect/ocserv (ocserv)

v1.6.0

Compare Source

  • Send the RADIUS session ID as Acct-Session-Id in the Access-Request (#​751)
  • Hardened per-user/group configuration file lookup against path-traversal;
    a malformed per-user/group or default configuration file now causes the
    affected session to be rejected rather than silently ignored. A configured
    default-user-conf or default-group-conf file that cannot be opened also
    now causes session rejection (previously silently ignored).
  • In certificate authentication the user is not prompted for group selection
    if the certificate provides a single group (#​692)
  • Simplified RADIUS Acct-Session-Time calculation to fix inflated time reporting
    for sessions that reconnected with the same cookie.
  • On TLS 1.3 CSTP sessions, rekey-method = ssl now performs a transparent
    TLS 1.3 KeyUpdate server-side instead of silently falling back to a full
    tunnel rebuild on every rekey (#​745)
  • Virtual host names longer than 43 characters are no longer silently
    truncated; such a [vhost:NAME] previously never matched the clients SNI
    and its clients were served by the default virtual host. Names may now be
    up to 253 characters (#​759)
  • sec-mod now sends a best-effort RADIUS Accounting-Stop for every open
    session when shutting down (#​643)
  • Simplified the radius backend by standardizing in radcli and removing
    compatibility with legacy radius libraries.
  • IPv4 /31 networks (netmask 255.255.255.254) can now be used for leases as
    point-to-point links (RFC 3021); previously no address could be leased from
    them. The server takes the network address and the client the other one.
  • The server-side IPv6 tunnel address is now the network address of
    ipv6-network (previously the network address + 1). Firewall rules, DNS
    settings or scripts that reference the servers ::1 tunnel address must be
    updated. This makes /127 point-to-point networks (RFC 6164) lease the
    expected address to the client, and a client can no longer be assigned
    the servers address as part of the first subnet (#​714)
  • The oidc authentication method supports the OpenID Connect authorization
    code flow, selected with mode=browser: openconnect client users log in
    through a browser. The default, mode=bearer, keeps validating a token
    the client already holds. OIDC support now requires GnuTLS 3.8.2
    or later.

Configuration

📅 Schedule: (UTC)

  • Branch creation
    • At any time (no schedule defined)
  • Automerge
    • At any time (no schedule defined)

🚦 Automerge: Disabled by config. Please merge this manually once you are satisfied.

♻ Rebasing: Whenever MR becomes conflicted, or you tick the rebase/retry checkbox.

🔕 Ignore: Close this MR and you won't be reminded about this update again.


  • If you want to rebase/retry this MR, check this box

This MR has been generated by Mend Renovate CLI.

This MR contains the following updates: | Package | Update | Change | |---|---|---| | [ocserv](https://gitlab.com/openconnect/ocserv) | minor | `1.5.0` → `1.6.0` | --- ### Release Notes <details> <summary>openconnect/ocserv (ocserv)</summary> ### [`v1.6.0`](https://gitlab.com/openconnect/ocserv/tags/1.6.0) [Compare Source](https://gitlab.com/openconnect/ocserv/compare/1.5.0...1.6.0) - Send the RADIUS session ID as Acct-Session-Id in the Access-Request (#&#8203;751) - Hardened per-user/group configuration file lookup against path-traversal; a malformed per-user/group or default configuration file now causes the affected session to be rejected rather than silently ignored. A configured default-user-conf or default-group-conf file that cannot be opened also now causes session rejection (previously silently ignored). - In certificate authentication the user is not prompted for group selection if the certificate provides a single group (#&#8203;692) - Simplified RADIUS Acct-Session-Time calculation to fix inflated time reporting for sessions that reconnected with the same cookie. - On TLS 1.3 CSTP sessions, rekey-method = ssl now performs a transparent TLS 1.3 KeyUpdate server-side instead of silently falling back to a full tunnel rebuild on every rekey (#&#8203;745) - Virtual host names longer than 43 characters are no longer silently truncated; such a [vhost:NAME] previously never matched the clients SNI and its clients were served by the default virtual host. Names may now be up to 253 characters (#&#8203;759) - sec-mod now sends a best-effort RADIUS Accounting-Stop for every open session when shutting down (#&#8203;643) - Simplified the radius backend by standardizing in radcli and removing compatibility with legacy radius libraries. - IPv4 /31 networks (netmask 255.255.255.254) can now be used for leases as point-to-point links (RFC 3021); previously no address could be leased from them. The server takes the network address and the client the other one. - The server-side IPv6 tunnel address is now the network address of ipv6-network (previously the network address + 1). Firewall rules, DNS settings or scripts that reference the servers ::1 tunnel address must be updated. This makes /127 point-to-point networks (RFC 6164) lease the expected address to the client, and a client can no longer be assigned the servers address as part of the first subnet (#&#8203;714) - The oidc authentication method supports the OpenID Connect authorization code flow, selected with mode=browser: openconnect client users log in through a browser. The default, mode=bearer, keeps validating a token the client already holds. OIDC support now requires GnuTLS 3.8.2 or later. </details> --- ### Configuration 📅 **Schedule**: (UTC) - Branch creation - At any time (no schedule defined) - Automerge - At any time (no schedule defined) 🚦 **Automerge**: Disabled by config. Please merge this manually once you are satisfied. ♻ **Rebasing**: Whenever MR becomes conflicted, or you tick the rebase/retry checkbox. 🔕 **Ignore**: Close this MR and you won't be reminded about this update again. --- - [ ] <!-- rebase-check -->If you want to rebase/retry this MR, check this box --- This MR has been generated by [Mend Renovate CLI](https://github.com/renovatebot/renovate). <!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiI0NC4xMzQuMSIsInVwZGF0ZWRJblZlciI6IjQ0LjEzNC4xIiwidGFyZ2V0QnJhbmNoIjoibWFzdGVyIiwibGFiZWxzIjpbXX0=-->
renovate_bot commented 2026-10-16 23:01:10 +00:00 (Migrated from jonasled.dev)

mentioned in issue #1

mentioned in issue #1
jonasled (Migrated from jonasled.dev) merged commit 80e74b0897 into master 2026-10-25 18:52:22 +00:00
jonasled commented 2026-10-25 18:52:23 +00:00 (Migrated from jonasled.dev)

mentioned in commit 80e74b0897

mentioned in commit 80e74b0897c1c75a786d0243448e188b17b6427c
Sign in to join this conversation.
No reviewers
No labels
No milestone
No project
No assignees
1 participant
Notifications
Due date
The due date is invalid or out of range. Please use the format "yyyy-mm-dd".

No due date set.

Dependencies

No dependencies set.

Reference
jonasled/openconnect-docker!14
No description provided.